LEDBAY 150UF G2
LEDBAY® 150UF is a new upgrade generation further improves the total cost of ownership and provides optionally DALI dimming and MESHnet wireless control system for further saving.
Benefits LED lighting - high quality light, longer service, lifetime, energy saving, less maintenance and smart control, giving your lighting design more reliable.
The luminaire can be installed on the existing grid. Electrical connection is straightforward.
Connect with MESHnet® DALI / MESHnet® 0-10V device and setup through MESHhub®. Make the lighting more intelligence for saving energy.
IP65
◼︎Features and Benefits
-
MESHnet ALLIANCE product, compatible with MESHnet 0-10V / DALI-2 to control LEDBAY.
-
Up to 155lm/w, 2700K - 6500K CCT selectable, optional 90CRI
-
High quality (Tier 1 brand) LED with Meanwell power supply.
◼︎Applications
-
Warehouse
-
Sport / Coliseum
-
Transportation Terminus
-
Factory / Production
-
Exhibition Center
1. Insulation Resistance
The IR shall be at least 50MΩ when apply 500Vac between primary and secondary
2. Dielectric Strength ( Hi-POT )
Input to output 3750Vac 60Hz 1 minute 3mA. When AC voltage of 3.75kv is applied, and the voltage applied to the insulation under test is gradually raised from zero to the prescribed voltage in 1s, and held at that value for 60s between the inputs. Output and between the input and housing, the current sensitivity shall be less than 5mA. After this test, the adapter shall exhibit no electrical and mechanical abnormalities.
3. Leakage Current
The leakage current shall be less than 0.25mA for Class II when power supply is operated maximum input voltage and maximum load.
4. Safety Standard
34A-1501NP IEC:60598-1:2008 IEC61347-1/A1:2010 IEC61347-2-13:2006 IEC62031:2008 IEC62471:2006 IEC62471-2:2009
EN60598-1/A11:2009 EN61347-2-13:2006 EN61347-1/A1:2011 EN62031:2008 EN62471:2008 EN61195:1999 EN62493:2010
5. EMI/EMC Standard
EN55015 EN61000-3-2 EN61000-4-2
◼︎Documentation
Datasheet
Installation Guideline
◼︎Design Resources
IES File